CX-7 AWD L4-2.3L Turbo (2008)
2. Set the SST parallel to the quick release connector.
NOTE: The quick release connector can be removed by pushing the center of the retainer tabs.
3. Hold the center of the retainer tabs with the SST ends and press the retainer.
4. Pull the connector side and disconnect the quick release connector.
5. Raise a retainer tab using the SST and remove the retainer.
6. Cover the disconnected quick release connector and evaporative hose with vinyl sheeting or a similar material to prevent it from scratches or dirt.
Type C Removal
1. Follow "BEFORE REPAIR PROCEDURE" and remove dirt from the connecting surfaces before performing any work operations. (See BEFORE
REPAIR PROCEDURE[L3 WITH TC].)
2. Move the retainer upward using a small flathead screwdriver or a similar tool.
3. Pull out the fuel hose straight from the fuel pipe and disconnect it.
