CX-7 AWD L4-2.3L Turbo (2008)
2. Disconnect the high pressure line pipe of the high pressure fuel pump.
1. Fix the joint nut with a wrench on the high pressure fuel pump side as shown in the figure.
2. Loosen the high pressure line pipe installation nut.
3. Remove the high pressure line pipe.
Fuel Injector Removal Note
NOTE: Depending on the driving conditions, carbon may accumulate on the inserted part of the fuel injector, causing the fuel injector to stick.
Remove the fuel injector using the following procedure.
1. Install the SST to the fuel injector confirming that the SST faces the correct direction as shown in the figure.
CAUTION:
-
If the SST slips while ratcheting up the fuel injector, the fuel injector or surrounding parts could be damaged. Press fit the SST to the
fuel injector firmly and operate carefully.
-
When ratcheting up the fuel injector, the fuel injector connector may contact the cylinder head and damage the fuel injector. Ratchet
up the fuel injector so that the fuel injector connector does not contact the cylinder head.
