CX-7 AWD L4-2.3L Turbo (2008)
Variable Induction System: Testing and Inspection
Variable Swirl Solenoid Valve Inspection
VARIABLE SWIRL SOLENOID VALVE INSPECTION[L3 WITH TC]
1. Remove the variable swirl solenoid valve.
2. Inspect the airflow between the ports under the following conditions.
-
If not as specified, replace the variable swirl control solenoid valve.
-
If as specified, carry out the "Circuit Open/Short Inspection".
Circuit Open/Short Inspection
1. Disconnect the PCM connector.
