CX-7 AWD L4-2.3L Turbo (2008)
1. Disconnect the PCM connector.
2. Inspect the following harnesses for an open or short circuit. (Continuity check)
Open circuit
-
If there is no continuity, there is an open circuit. Repair or replace the wiring harness
-
Variable swirl shutter valve switch terminal A and PCM terminal 2AE.
-
Variable swirl shutter valve switch terminal B and body ground.
Short circuit
-
If there is continuity, there is a short circuit. Repair or replace the wiring harness.
-
Variable swirl shutter valve switch terminal A and power supply
-
Variable swirl shutter valve switch terminal A and body ground
-
Variable swirl shutter valve switch terminal B and power supply