CX-7 AWD L4-2.3L Turbo (2008)
1. Inspect the following wiring harnesses for an open or short circuit. (Continuity check)
Open circuit
-
If there is no continuity, the circuit is open. Repair or replace the wiring harness.
-
CMP sensor terminal A and main relay terminal E
-
CMP sensor terminal B and PCM terminal 2P
-
CMP sensor terminal C and PCM terminal 2S
Short circuit
-
If there is continuity, the circuit is shorted. Repair or replace the wiring harness.
-
CMP sensor terminal A and body ground
-
CMP sensor terminal B and power supply
-
CMP sensor terminal C and body ground
-
CMP sensor terminal C and power supply