CX-7 AWD L4-2.3L Turbo (2008)
more than 20 AMPS to keep the vehicle battery up to capacity. If you exceed 20 AMPS, it could damage the VCM.
3. After performing the TCM reprogramming procedure, verify the repair by starting the engine and making sure there are no MIL illumination or
abnormal warning lights present.
NOTE:
^
If any DTCs should remain after performing DTC erase, diagnose the DTCs according to the appropriate Troubleshooting section of the Workshop
Manual.
^
After TCM reprogramming, it is no longer necessary to road test the vehicle to "relearn" KAM (Keep Alive Memory).
4. In addition to reprogramming the TCM, replace the thermo valve with a minimum flow spec. thermo valve according to Workshop Manual (section
05-17 OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL]).
CALIBRATION INFORMATION
PART(S) INFORMATION
