CX-7 AWD L4-2.3L Turbo (2008)
1. Disconnect the PCM connector.
2. Inspect the following wiring harnesses for an open or short circuit. (Continuity check)
Open circuit
-
If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
-
APP sensor terminal A and PCM terminal 1AJ
-
APP sensor terminal B and PCM terminal 1AV
-
APP sensor terminal C and PCM terminal 1AC
-
APP sensor terminal D and PCM terminal 1Q
-
APP sensor terminal E and PCM terminal 1U
-
APP sensor terminal F and PCM terminal 1Y
Short circuit
-
If there is continuity, there is a short circuit. Repair or replace the wiring harness.
-
APP sensor terminal A and body ground
-
APP sensor terminal B and power supply
-
APP sensor terminal C and power supply
-
APP sensor terminal C and body ground
-
APP sensor terminal D and body ground
-
APP sensor terminal E and power supply
-
APP sensor terminal F and power supply
-
APP sensor terminal F and body ground
