CX-7 AWD L4-2.3L Turbo (2008)
-
FP hold pressure
-
Fuel injector for leakage
-
Fuel line for improper routing, kinks or leakage
Fuel hold pressure
More than 230 kPa (2.3 kgf/sq.cm, 33 psi)
12. Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE[L3 WITH TC)) See: Fuel Delivery and Air
Induction/Service and Repair/Procedures/Before Repair Procedure
13. Disconnect the vacuum hose from the intake manifold that connecting to the brake booster.
14. Disconnect the SST.
15. Connect the quick release connector.
High Pressure Line (From the High Pressure Fuel Pump to the Fuel Injector)
1. Inspect the fuel pressure sensor.
2. Inspect the high pressure fuel pump.