CX-7 AWD L4-2.3L Turbo (2008)
negative battery terminal.
7. Verify that the red lamp on the SST (Deployment tool) is illuminated.
8. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.
9. Press the activation switch on the SST (Deployment tool) to operate (deploy) the curtain air bag module.
10. Disconnect the SSTs (Deployment tool) from the SSTs (Adapter harness).
Pre-tensioner Seat Belt
1. Remove the B-pillar lower trim.
2. Remove the pre-tensioner seat belt and connect the SST (Adapter harness) as shown in the figure.
3. Install the pre-tensioner seat belt.
4. Connect the SST (Deployment tool) to the SST (Adapter harness).
5. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the
negative battery terminal.
6. Verify that the red lamp on the SST (Deployment tool) is illuminated.
7. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.
