CX-7 AWD L4-2.3L Turbo (2008)
Seat Belt: Service and Repair
Rear Center Seat Belt Removal/Installation
REAR CENTER SEAT BELT REMOVAL/INSTALLATION
CAUTION: The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot
be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
1. Remove the following parts:
1. A-pillar lower trim
2. A-pillar trim
3. Front scuff plate inner
4. Rear scuff plate inner
5. B-pillar lower trim
6. Front seat belt upper anchor installation bolt
7. B-pillar upper trim
8. Rear seat
9. Sub trunk box
10. Trunk end trim
11. Trunk side trim
12. C-pillar trim
13. D-pillar trim
14. Map light
15. Sunvisor
16. Assist handle
17. Headliner
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
