CX-7 AWD L4-2.3L Turbo (2008)
2. Measure the output voltage using an oscilloscope.
-
If not within the specification, replace the CKP sensor.
-
If the monitor item condition/specification (reference) is without the specification, even though the voltage is within the specification, carry out
the "Circuit Open/Short Inspection".
Circuit Open/Short Inspection
1. Inspect the following wiring harnesses for an open or short circuit. (Continuity check)
Open circuit
-
If there is no continuity, the circuit is open. Repair or replace the wiring harness.
-
CKP sensor terminal A and PCM terminal 2P
-
CKP sensor terminal B and PCM terminal 2W
-
CKP sensor terminal C and main relay terminal E
Short circuit
-
If there is continuity, the circuit is shorted. Repair or replace the wiring harness.
-
CKP sensor terminal A and power supply