CX-7 AWD L4-2.3L Turbo (2008)
6. Remove the thermo valve.
7. Remove the control valve body.
8. Remove the TFT sensor.
9. Place the TFT sensor and a thermometer in ATF as shown in the figure, and heat the ATF gradually
Transaxle Fluid Temperature (TFT) Sensor
10. Measure the resistance between the coupler component terminals B7 and B8.
^
If there is any malfunction, replace the TFT sensor.
Transaxle fluid temperature (TFT) sensor
11. Install the TFT sensor.
12. Install the control valve body.
13. Install the thermo valve.
14. Install the resonance chamber.
15. Add ATF to the specified level.
