CX-7 AWD L4-2.3L Turbo (2008)
Step 5
2. Inspect as follows:
Generator Inner Parts
Rotor
1. Measure the resistance between the slip rings using a tester.
-
If not within the specification, replace the rotor.
Generator rotor resistance (between slip rings) [20 °C {68 °F}] 1.8-2.2 ohm
2. Verify that there is no continuity between the slip ring and core using a tester.
-
If there is continuity, replace the rotor.
3. Inspect the slip ring surface condition.
-
If the slip ring surface is rough, use a lathe or fine sandpaper to smooth it.
Stator coil