CX-7 AWD L4-2.3L Turbo (2008)
1. Apply grease to the oil dust cover shown in the figure.
^
Specified grease Rubber grease (Mazda genuine parts) or equivalent.
Adjusting Cover, Locknut (Adjusting Cover) Assembly Note
1. Install two nuts to the bolt across a flat 24 mm (0.94 in) and tighten them using a wrench.
2. Using the bolt/nut produced in Step 1, install the adjusting cover.
(1) Tighten the adjusting cover with a tightening torque of 20.0 Nm (2.0 kgf-m, 14.8 ft-lbf).
(2) Using the SST, loosen the adjusting cover to 25-30°.
3. Apply sealant to the locknut.
4. Secure the adjusting cover with the bolt and nuts created in Step 1, and tighten the locknut using the SST.
