mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Suspension - Front End Squeaking Noise On Rough Roads|Page 5024 > < Component Tests and General Diagnostics|Page 5014
Page 1
background image

Stabilizer Bushing: All Technical Service Bulletins
Suspension - Front End Squeaking Noise On Rough Roads

Bulletin No: 02-004/09

Last Issue: 06/02/2009

Subject:
SQUEAK NOISE FROM FRONT STABILIZER BUSHING

APPLICABLE MODEL(S) / VINS
2007-2009 CX-7 vehicles with VINs lower than JM3ER****9*238574 
(produced before February 1, 2009)

DESCRIPTION

Some vehicles may exhibit a squeak noise coming from the front stabilizer (A) when driving on rough road surfaces or passing over speed bumps.

Due to a lack of hardness on the edge of the front stabilizer bushing (B), noise occurs between the front stabilizer and bushing. The shape of the bushing
has been changed to eliminate the noise.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Replace both stabilizer bushings (A) with new parts according to MS3 online instructions or Workshop Manual (section 02-13 FRONT STABILIZER
REMOVAL/INSTALLATION).

Suspension - Front End Squeaking Noise On Rough Roads|Page 5024 > < Component Tests and General Diagnostics|Page 5014