CX-7 AWD L4-2.3L Turbo (2008)
1. Remove the rear ABS wheel-speed sensor and rear ABS wheel-speed sensor harness connected to the rear trailing link.
Caliper Component Removal Note
1. Suspend the caliper aside with cable.
Bolt (Rear Shock Absorber Lower Side) Removal Note
1. Support the trailing link with a jack.
2. Remove the bolts (rear shock absorber lower side).
Bolts (Rear Lateral Link Outer Side And Rear Upper Arm Outer Side) Removal Note
1. Raise the trailing link to the unloaded condition with a jack.
Note:
^
Jacking up the rear suspension to the no occupant position will lighten the force on the bushing and make it easier to perform the procedure.
2. Remove the bolts (rear lateral link outer side and rear upper arm outer side).
Bolts (Rear Lateral Link Outer Side And Rear Upper Arm Outer Side) Installation Note