CX-7 AWD L4-2.3L Turbo (2008)
Substitution SST
^
49 G033 105
Outer diameter: 37 - 43 mm (1.5 - 1.6 in)
2. If the bearing inner race remains on the front wheel hub component, grind a section of the bearing inner race until approximately 0.5 mm (0.02
in) remains. Then remove it using a chisel.
Wheel Bearing Removal Note
1. Remove the wheel bearing using the SSTs.
Substitution SST
^
49 G033 106
Outer diameter: 54 - 63 mm (2.2 - 2.4 in)
Dust Cover Removal Note
Note:
^
The dust cover does not need to be removed unless it is being replaced.
1. Mark the dust cover and steering knuckle for proper installation.
