CX-7 AWD L4-2.3L Turbo (2008)
10. Be sure to match the position of the TCM marking.
Caution
^
Do not turn more than 60° from the marking.
11. Install the TCM.
12. Verify the correct positioning of the TCM and coupler component.
13. Tighten the TCM mounting bolts.
Tightening torque: 19.6-29.4 N-m (2.0-2.9 kgf-m, 14.5-21.6 ft-lbf)
Caution
^
Do not use an impact wrench. Hold the manual shaft lever when removing the manual shaft nut, or the transaxle may be damaged.
14. Install the manual shaft lever and the washer.
15. Set the adjustable wrench as shown in the figure to hold the manual shaft lever, and tighten the manual shaft nut.
Tightening torque: