CX-7 AWD L4-2.3L Turbo (2008)
Outer diameter: 54.5-61 mm (2.15-2.40 in)
Inner diameter: 52 mm (2.05 in) or more
Plate thickness: 2 mm (0.08 in) or more
Converter housing side (2WD)
Substitution SST
^
49 F027 009
Outer diameter: 76.8 mm (3.02 in)
Plate thickness: 2 mm (0.08 in) or more
Converter housing side (AWD)
Substitution SST
^
49 L033 101
Outer diameter: 73-76.3 mm (2.88-3.00 in)
Inner diameter: 69 mm (2.72 in) or more
Plate thickness: 2 mm (0.08 in) or more
Length: 20 mm (0.79 in) or more
10. Install the joint shaft.
11. Install the transfer and joint shaft.
12. Install the drive shaft.
13. Add ATF to the specified level.
14. Connect the negative cable.
15. Perform the mechanical system test. (See Mechanical System Test [AW6A-EL, AW6AX-EL].) See: Transmission Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Mechanical System Test