mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
A/T - Fluid Leaks From Servo Cover|Page 3593 > < A/T - Fluid Leaks From Servo Cover|Page 3591

CX-7 AWD L4-2.3L Turbo (2008)

Page 3
background image

6. Place ATF recovery container under servo cover and remove the servo cover.

7. Slowly remove the brake piston from the servo cover.

8. Remove O-rings from the brake piston and the servo cover, apply ATF to the new O-rings, and assemble them into the servo cover and the brake
piston. Install the piston spring.

^ Be careful not to damage new O-rings during the assembly.

9. Use a stand lift to press the servo cover, the brake piston and the spring into position.

A/T - Fluid Leaks From Servo Cover|Page 3593 > < A/T - Fluid Leaks From Servo Cover|Page 3591