CX-7 AWD L4-2.3L Turbo (2008)
^
If there is any malfunction, inspect the coupler component.
^
If the coupler component is normal, replace the input/turbine speed sensor.
6. Install the TCM.
7. Install the air cleaner component.
8. Connect the negative battery cable.
Off-Vehicle Inspection
Warning
^
A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool before replacing the ATF.
Caution
^
Water or foreign material entering the connector can cause a poor connection or corrosion. Be sure not to allow water or foreign
material on the connector when disconnecting.
^
Do not damage the terminals.
1. Disconnect the negative battery cable.
2. Remove the air cleaner component.
4. Drain the ATF.
5. Remove the resonance chamber.
6. Remove the thermo valve.
7. Remove the control valve body.
8. Remove the input/turbine speed sensor.
