CX-7 AWD L4-2.3L Turbo (2008)
^
Be careful that the coupler component will not become caught between the control valve body cover and transaxle case.
13. Install the new control valve body cover with new seal bolts.
Tightening torque:
9.8-15.7 N-m (100-160 kgf-cm, 87-138 in.lbf)
14. Install the thermo valve.
15. Install the resonance chamber.
16. Install the TCM.
17. Add ATF to the specified level.
18. Install the under cover.
19. Install the air cleaner component.
20. Connect the negative battery cable.
21. Perform the mechanical system test. (See Mechanical System Test [AW6A-EL, AW6AX-EL].) See: Transmission Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Mechanical System Test