CX-7 AWD L4-2.3L Turbo (2008)
Drive/Propeller Shaft: Testing and Inspection
Propeller Shaft Inspection
PROPELLER SHAFT INSPECTION
1. Measure the propeller shaft center runout using the dial gauge. If it exceeds the maximum specification, replace the propeller shaft as a single
component.
Maximum propeller shaft runout 0.8 mm (0.031 in)
2. Inspect the play and rotation of the joint by turning the universal joint in the directions shown by the arrows. If it is not within the specification,
replace the propeller shaft.
Propeller shaft starting torque 0.29 - 1.47 Nm (3.0 - 14.9 kgf-cm, 2.6 - 13.0 in-lbf)
