CX-7 AWD L4-2.3L Turbo (2008)
Actuator: Testing and Inspection
AWD SOLENOID INSPECTION
1. Disconnect the negative battery cable.
2. Disconnect the AWD solenoid connector.
3. Measure resistance between AWD solenoid connector terminals A and B. If the resistance is not within the specification, replace the coupling unit.
AWD solenoid resistance 1.5 - 2.0 ohms (Rear differential oil temperature at 20° C (68° F))
4. Connect the AWD solenoid connector.
5. Connect the negative battery cable.