CX-7 AWD L4-2.3L Turbo (2008)
10. After the primer has dried, apply 11 mm {0.43 in} in thickness, 5 mm {0.20 in} in width of sealant using a sealant gun. Where it is not applied
properly, correctly apply it using a spatula.
11. Insert the positioning pins 10 the body and install the quarter window glass.
12. Install the following parts:
1. D-pillar trim
2. C-pillar trim
3. Trunk side trim
4. Trunk end trim
5. Trunk side trim
6. Sub trunk box
7. Rear seat
8. Rear scuff plate inner
13. Allow the sealant to harden completely.
Sealant hardening time: 24 h
