CX-7 AWD L4-2.3L Turbo (2008)
4. Align the marks made before removal and install the pin to the windshield referring to the figure. (when reusing the glass, and the pin was
removed)
5. Install the windshield molding.
6. Use glass primer on the glass, then allow it to dry for approx. 30 min.
CAUTION: To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
NOTE: Make sure to apply primer to the hollowed marks in the ceramic coating.