CX-7 FWD L4-2.3L Turbo (2010)
Antenna - Keyless Entry: Service and Repair
Keyless Antenna Removal/Installation - Advanced Keyless Entry and Start System
KEYLESS ANTENNA REMOVAL/INSTALLATION [ADVANCED KEYLESS ENTRY AND START SYSTEM]
Exterior, LF/RF
1. Disconnect the negative battery cable.
2. Remove the door trim. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim Removal/Installation
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Exterior, Rear
1. Disconnect the negative battery cable.
2. Remove the bolts.
3. Disconnect the connector, then remove the keyless antenna.
4. Install in the reverse order of removal.
Interior, Middle
1. Disconnect the negative battery cable.
2. Remove the console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Console
Removal/Installation
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.
