mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Keyless Entry Module > < Coil Antenna Removal/Installation|Page 5736
Page 2
background image

5. Install in the reverse order of removal.

Interior, Rear

1. Disconnect the negative battery cable.

2. Remove the rear seat.  See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Removal/Installation

3. Remove the clips.

4. Disconnect the connector, then remove the keyless antenna.

5. Install in the reverse order of removal.

Keyless Entry Module > < Coil Antenna Removal/Installation|Page 5736