CX-7 FWD L4-2.3L Turbo (2010)
FRONT DOOR SPEAKER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Inner Garnish Removal/Installation
3. Remove the front door trim. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim Removal/Installation
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Front Door Speaker Installation Note
1. Remove the speaker with the wiring harness passing through the groove of the front door module.
CAUTION:
-
If the speaker is installed with the wiring harness out of the groove, an open circuit in the wiring harness could occur.
Front Speaker Removal/Installation
FRONT SPEAKER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
