CX-7 FWD L4-2.3L Turbo (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Removal/Installation
COWL PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Windshield wiper arm and blade (See See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Windshield Wiper Arm and Blade
Removal/Installation)
b. Cowl grille (See See: Cowl Grille Removal/Installation)
3. Remove the bolts, then remove the cowl panel.
4. Install in the reverse order of removal.
