CX-7 FWD L4-2.3L Turbo (2010)
Front Door Window Motor: Service and Repair
POWER WINDOW MOTOR REMOVAL/INSTALLATION
Front Power Window Motor
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Inner garnish See: Front Door Panel/Service and Repair/Removal and Replacement/Inner Garnish Removal/Installation
b. Front door trim See: Front Door Panel/Service and Repair/Removal and Replacement/Front Door Trim Removal/Installation
3. Remove the bolts.
4. Remove the front power window motor from the power window regulator.
5. Disconnect the power window motor connector.
6. Install in the reverse order of removal.
NOTE:
-
When installing the front power window motor to the front power window regulator drum, the drum housing hooks may detach from the door
module. If this happens, remove the front door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and
while supporting the drum housing, install the front power window motor to the drum.