CX-7 FWD L4-2.3L Turbo (2010)
3. Remove the No.1 engine mount bolt (engine side).
4. Lower the steering gear and linkage, front stabilizer, front lower arm and front crossmember component slightly.
5. Disconnect the return hose indicated in the figure.
6. Disconnect the pressure hose (power steering pump side) indicated in the figure.
Front Crossmember Mounting Rubber (front) Installation Note
1. Install the front crossmember mounting rubber (front) so that the smaller outer diameter is facing upward.
Front Crossmember Mounting Rubber (rear) Installation Note
1. Install the front crossmember mounting rubber (rear) so that the larger outer diameter is facing upward.
