CX-7 FWD L4-2.3L Turbo (2010)
Scuff Plate: Service and Repair
Trunk End Trim Removal/Installation
TRUNK END TRIM REMOVAL/INSTALLATION
1. Remove the sub trunk box. (See See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair)
2. Remove the fasteners.
3. Pull the trunk end trim upward, then disengage tabs A, clips B and pins C.
4. Remove the tabs D.
5. Remove the trunk end trim.
6. Remove the bezel.
7. Install in the reverse order of removal.
