CX-7 FWD L4-2.3L Turbo (2010)
9. Install in the reverse order of removal.
D-Pillar Trim Removal/Installation
D-PILLAR TRIM REMOVAL/INSTALLATION
1. Remove the following parts:
a. Rear scuff plate inner See: Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation
b. Rear seat See: Seats/Service and Repair/Removal and Replacement/Rear Seat Removal/Installation
c. Sub trunk box See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair
d. Trunk end trim See: Scuff Plate/Service and Repair/Trunk End Trim Removal/Installation
e. Trunk side trim
2. Partially peel back the seaming welt.
3. Remove the fastener.
4. Pull the D-pillar trim outward and detach clips A and pin B.
5. Pull the D-pillar trim upward and detach hook C.
6. Remove the D-pillar trim.
7. Install in the reverse order of removal.
Sail Garnish Removal/Installation
SAIL GARNISH REMOVAL/INSTALLATION
1. Pull the sail garnish outward and detach clips A and B.
2. Remove the sail garnish.
3. Install in the reverse order of removal.
