CX-7 FWD L4-2.3L Turbo (2010)
Power Mirror Switch: Testing and Inspection
POWER OUTER MIRROR SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement/Inner
Garnish Removal/Installation
3. Remove the front door trim. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim Removal/Installation
4. Remove the power outer mirror switch. See: Service and Repair
5. Using a tester, verify that the continuity between the power outer mirror switch terminals is as indicated in the table.
-
If not as indicated in the table, replace the power outer mirror switch.