CX-7 FWD L4-2.3L Turbo (2010)
6. Then, select items from the screen menu in the following order.
-
Select "Steering Lock Unit Programming"
7. The security access begins and the M-MDS displays "OUT-CODE".
NOTE:
-
When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".
8. Input the "IN-CODE" that corresponds to the "OUT-CODE" displayed on the M-MDS screen.
9. Perform procedures according to the directions on the M-MDS screen.
Transmitter ID Code Registration
TRANSMITTER ID CODE REGISTRATION [KEYLESS ENTRY SYSTEM]
NOTE:
-
When registering the ID code into a keyless control module, verify that other transmitters are not being operated in the vicinity.
-
After ID code registering, remove the key from the steering lock and verify that all doors lock/unlock normally using the transmitter.