CX-7 FWD L4-2.3L Turbo (2010)
Memory Positioning Module: Service and Repair
POSITION MEMORY CONTROL MODULE REMOVAL/INSTALLATION
1. Operate the power seat switch and move the seat cushion forward and upward.
2. Turn the ignition switch to the LOCK position.
3. Disconnect the negative battery cable and wait 1 min or more.
4. Remove the front seat side cover. See: Seats/Service and Repair/Overhaul/Front Seat Side Cover Removal/Installation
5. Remove the front seat front cover. See: Seats/Seat Cover/Service and Repair
6. Disconnect the position memory control module connectors.
7. Remove the screws then remove the position memory control module.
8. Install in the reverse order of removal.
