CX-7 FWD L4-2.3L Turbo (2010)
Brake Rotor/Disc: Service and Repair
Rear Brake (Disc) Removal/Installation
REAR BRAKE (DISC) REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, add brake fluid, bleed the air, and inspect for fluid leakage. See: Brake Bleeding/Service and Repair
4. After installation, do the following.
a. Depress the brake pedal a few times. Then verify that the brakes do not drag.
b. Inspect the parking brake pedal stroke. See: Parking Brake System/Testing and Inspection
