CX-7 FWD L4-2.3L Turbo (2010)
Vacuum Brake Booster Check Valve: Service and Repair
VACUUM HOSE REMOVAL/INSTALLATION
1. Remove the clamps and vacuum hose (power brake unit side).
2. Insert a thin flathead screwdriver at the point indicated by the arrow in the figure, push the ring down and disconnect the vacuum hose from the
intake manifold.
3. Remove the vacuum hose.
4. Install in the reverse order of removal.
5. Verify that the vacuum hose is inserted so that the joint contacts the intake manifold ring.
