CX-7 FWD L4-2.3L Turbo (2010)
CAUTION:
-
Install the oil pressure switch before the applied silicone sealant starts to harden.
12. Install the oil pressure switch.
Tightening torque
-
12-18 Nm {1.3-1.8 kgf-m, 9-13 ft-lbf}
13. Connect the negative battery cable.
14. Start the engine and confirm that there is no oil leakage.
-
If there is oil leakage, repair or replace the applicable part.
15. Install the under cover.