CX-7 FWD L4-2.3L Turbo (2010)
Oil Pan Removal Note
1. Remove the oil pan using a separator tool.
Oil Pan Installation Note
CAUTION:
1
Apply the silicon sealant in a single, unbroken line.
2
Using bolts with the old seal adhering could cause cracks in the housing.
1. Completely clean and remove any oil, dirt, sealant or other foreign material that may be adhering to the housing and oil pan.
2. When reusing the oil pan installation bolts, clean any old sealant from the bolts.
3. Apply silicone sealant to the oil pan along the inside of the bolt holes as shown in the figure.
CAUTION:
