CX-7 FWD L4-2.3L Turbo (2010)
No.3 Engine Mount Installation Note
1. Tighten the No.3 engine mount stud bolts.
Tightening torque
-
7.0-13 Nm {72-132 kgf-cm, 62-115 in-lbf}
NOTE:
-
If the No.3 engine joint bracket and the engine are removed, retighten the No.3 engine mount stud bolt
2. Temporarily tighten the bolts and nuts in the order shown in the figure.
3. Tighten the bolts and nuts in the order shown in the figure.
