CX-7 FWD L4-2.3L Turbo (2010)
Compressor Clutch: Service and Repair
Magnetic Clutch Disassembly/Assembly - Manual Air Conditioner
MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY [MANUAL AIR CONDITIONER]
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
3. Adjust the magnetic clutch clearance. See: Adjustments/Magnetic Clutch Adjustment - Manual Air Conditioner
Bolt Removal/Installation Note
1. When removing or installing the bolt, lock the A/C compressor pulley against rotation using the following procedure
CAUTION:
-
When connecting the positive battery cable to the magnetic clutch connector, use a cable with a female terminal of the correct size. Otherwise,
load will be applied to the terminal, resulting in deformation or damage, and poor contact. In addition, the positive battery cable could
disconnect from the connector resulting in a short circuit.
a. Apply battery positive voltage to the magnetic clutch terminal and connect the A/C compressor body to the ground.