CX-7 FWD L4-2.3L Turbo (2010)
b. Wrap the drive belt, which is no longer of use, tightly around the A/C compressor pulley.
c. Hold the drive belt in place with pliers.
d. Remove/installation the bolt.
Tightening torque
-
15 Nm {1.5 kgf-m, 11 ft-lbf}
A/C Compressor Pulley Removal Note
1. Remove the A/C compressor pulley using the SSTs (49 0839 425C, 49 SE01 160).
CAUTION:
-
Be careful that the SST (49 0839 425C) tabs do not hang over the stator.