CX-7 FWD L4-2.3L Turbo (2010)
NOTE:
-
Taping on the nail for protect to damage.
A/C Compressor Pulley Installation Note
1. Install the inner wheel of the pulley using SST (49 D034 202) to the compressor.
CAUTION:
-
If the SST is not properly positioned when the A/C compressor pulley is press-fit, the A/C compressor axle will interfere with the SST, possibly
damaging component parts. Verify the SST and axle are properly positioned and perform the procedure very carefully.
Snap Ring Removal/Installation Note
1. Remove/installation the snap ring using a snap ring pliers.
Shim Installation Note
1. First, insert the 1mm (0.039 in) thick shim into the shaft.