CX-7 FWD L4-2.3L Turbo (2010)
Driver/Vehicle Information Display: Customer Interest
Instruments - Multi-Information Display Distorted
Bulletin No: 09-027/10
Last Issued: 06/01/2010
Subject:
DISTORTED MULTI INFORMATION DISPLAY (MID) SCREEN
APPLICABLE MODEL(S)/VINS
2010 CX-7 vehicles with VINS lower than JM3ER******310784 (produced before Oct. 10, 2009)
DESCRIPTION
On some vehicles, the Multi Information Display (MID) may intermittently become distorted (unreadible). This condition may be the result of static
electricity affecting the internal circuitry of the MID during the manufacturing process.
The MIDs tolerance to static electricity has been improved during mass-production to eliminate this concern. Customers having this concern should have
their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
2. Replace the MID according to MS3 online instructions or the Workshop Manual (section 09-22 MULTI INFORMATION DISPLAY
REMOVAL/INSTALLATION).
3. Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
^
This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^
This repair will be covered under Mazda's New Vehicle Limited Warranty term. Additional diagnostic time cannot be claimed for this repair.
Disclaimer