CX-7 FWD L4-2.3L Turbo (2010)
Headlamp Bulb: Service and Repair
HEADLIGHT BULB REMOVAL/INSTALLATION
Low-beam
Halogen type
1. Disconnect the negative battery cable.
2. Remove the fasteners and slightly bend back the mudguard.
3. Disconnect the connector.
CAUTION:
-
A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the
life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.
4. Remove the cover.
5. Remove the headlight bulb.
6. Install in the reverse order of removal.
Discharge type
WARNING:
-
Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the
discharge headlight service warnings. See: Service Precautions
1. Disconnect the negative battery cable.
2. Remove the fasteners and slightly bend back the mudguard.
3. Remove the cover.
CAUTION:
-
The bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of
the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.
4. Disconnect the connector.
5. Remove the discharge headlight.
6. Install in the reverse order of removal.
High-beam
