CX-7 FWD L4-2.3L Turbo (2010)
Key Cylinder Lamp: Service and Repair
IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION
Vehicles Without Advanced Keyless System
1. Disconnect the negative battery cable.
2. Pull the upper column cover upward and detach the upper column cover from the lower column cover. See: Steering and
Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
3. Put aside the upper column cover.
4. Remove the ignition key illumination bulb.
5. Install in the reverse order of removal.
Vehicles With Advanced Keyless System
1. Disconnect the negative battery cable.
2. Remove the lower column cover. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
3. Remove the coil antenna. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Antenna - Keyless Entry/Service
and Repair/Coil Antenna Removal/Installation
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Socket removal note
1. Remove the socket by turning it in the direction shown by the arrow.