CX-7 FWD L4-2.3L Turbo (2010)
Combination Switch: Overhaul
COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
WARNING:
-
Do not remove the steering angle sensor as a single unit. Otherwise, the disc inside the steering angle sensor will deform when the steering angle
sensor is installed causing the neutral position to deviate, and may prevent the steering system, which uses the steering angle sensor, from
functioning normally. If the steering angle sensor is replaced or the sensor is mistakenly removed, replace the combination switch body.
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
