mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Tail Lamp > < Turn Signal Switch|Locations
Page 1
background image

Spot Lamp: Service and Repair

SPOT LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the A-pillar trim.  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation

3. Remove the sunvisor.  See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair

4. Remove the map light.  See: Map Light/Service and Repair

5. Set the headliner out of the way.

6. Remove in the order indicated in the table.

7. Install in the reverse order of removal.

Tail Lamp > < Turn Signal Switch|Locations